Find Parts

Search By Item Number Or Keyword
Search Manufacturers By Letter

Still Can't Find It?

If you're unable to locate an item please contact us directly.

Please have the following information ready:

  1. Firearm Manufacturer
  2. Firearm Model and Serial Number
  3. Gauge or Caliber of Firearm
  4. Part Description
  5. Any other pertinent information

Then please call our Sales Department toll free at:

866-NUMRICH

(866-686-7424)

Outside U.S.A.

845-679-2417

Office Hours:

Monday through Friday
8:00 a.m. to 4:30 p.m. EST

Forums

Forums Home > Gunsmithing > Early Taurus Model 80 parts
Early Taurus Model 80 parts
Replies for Early Taurus Model 80 parts
Author Message
Levi875468
Author Image
Joined: March 2013
Posts: 0
Location:
ALAMOGORDO, NM
Posted: March 28, 2013 2:20 PM

Hi,

 

I have an early model 80 taurus .38 special that I need a couple parts for.  Numrich is sold out on the parts and recommended posting on here to see if anyone could help me out.  My revolver is one of the "pre model #" guns, so I did quite a bit of research to find out which model it was.  It is a "Firearms Int'l Corp" gun.  I need the hand spring and the hand pin for it.  Numrich #'s are 581280A (hand spring) and 581270 (hand pin). Off the model 80 schematic.  Their computer also listed 21.01027-7 (hand pin) and 31.30039.1 (hand spring) which they thought could be Taurus part numbers.

 

Any help would be greatly appreciated!  I would like to go shoot!!

Zeke
Author Image
Joined: August 2011
Posts: 3681
Location:
JAMESPORT, NY
Posted: March 28, 2013 5:02 PM
You could check with Taurus...www.taurususa.com but their policy is that certain parts are restricted. Another source can be checked via an e-mail to mailto:armatt@aol.com....but if th... and Wolff Guns Springs has kits for many firearms to replace the springs  Google them
Our members have made a total of 238364 posts
We have 469201 registered members
The newest member is John984880
FORUM RULES
You are not logged in.
You cannot post replies