If you're unable to locate an item please contact us directly.

Please have the following information ready:

Then please call our Sales Department toll free at:

Outside U.S.A.

Office Hours:

Monday through Friday
8:00 a.m. to 4:30 p.m. EST

Forums

Forums Home > Gunsmithing > Franchi alcione t safety spring

Franchi alcione t safety spring

Replies for Franchi alcione t safety spring
Author	Message
A12 Joined: November 2012 Posts: 1 Location: BREWSTER, NY	Posted: November 8, 2012 10:11 AM Safety spring on my Franchi Alcione t comes off the retaining rod.Anyone ever have this problem.. I had it fixed once after about 150 rounds it happened again.I"m trying to locate a new spring and retaining rod.Any advice would help. hanks
Back to top
Zeke Joined: August 2011 Posts: 2749 Location: JAMESPORT, NY	Posted: November 10, 2012 1:38 PM In our host's paper catalog ,this model is shown under the headings of FRANCHI...Black Magic Sporting Hunter..You should be able to access same on line....or under the heading of Franchi 201 Series which also shows an ALCIONE model there seems to be a couple of options on the safety..check the single trigger and double trigger versions..if you mix parts..they may not function properly....
Back to top
A12 Joined: November 2012 Posts: 1 Location: BREWSTER, NY	Posted: February 10, 2013 7:12 AM Update for on this problem. Benelli sent me a new spring and retaining pin. After 200 rounds same problem. Turned out the hole for the retaining pin had elongated causing the retaining pin to shift on recoil. I installed a new safety button which solved the problem. Hpoe this helps anyone who runs into this issue.
Back to top

Our members have made a total of 235073 posts

We have 379226 registered members

The newest member is Carl894860

FORUM RULES
You are not logged in.
You cannot post replies