Search Find Parts

Find Parts

Search By Item Number Or Keyword
Search Manufacturers By Letter

Still Can't Find It?

If you're unable to locate an item please contact us directly.

Please have the following information ready:

  1. Firearm Manufacturer
  2. Firearm Model and Serial Number
  3. Gauge or Caliber of Firearm
  4. Part Description
  5. Any other pertinent information

Then please call our Sales Department toll free at:


Outside U.S.A.:


Office Hours:
Monday through Friday
8:00 a.m. to 4:30 p.m. EST


RG Ind.
Replies for RG Ind.
Author Message
Author Image
Joined: November 2012
Posts: 0
Posted: March 29, 2013 10:04 AM

Needing a frame for RG Ind. Mod. 14 in 22 Cal.
Author Image
Joined: August 2011
Posts: 5640
Posted: March 29, 2013 1:06 PM
FWIW...The Government sez that the frame is the gun and must be treated like the sale and transfer of a complete gun....and.."RG" is made by ROHM  full naqme is ROHM RG14 and you may need this full name to run a search. That said.The Gun Control Act of 1968 just about stopped the import of this class of firearm. You would be better off to locate a junker and use your parts to rebuild it. One reason being, that unless YOU are an FFL dealer..the dealer transfer fees will easily eclipse the value of the gun..Most FFL's will charge between $25 and $100 to effect the transfer and do the paperwork...AND  you will need TWO FFL to ship..the other to recieve. Value of your RG-14 in excellent condition is about $65The RG-14 was a production item from 1978 of ROHM efforts to comply with the GCA-68 points system for import..One source of a frame  May be via an e-mail to    Good luck  BTW  your parts will not be a safe drop-in fit..there is MATH that must be held to.....
Our members have made a total of 245833 posts
We have 744718 registered members
The newest member is robert1260614
You are not logged in.
You cannot post replies