Find Parts

Search By Item Number Or Keyword
Search Manufacturers By Letter

Still Can't Find It?

If you're unable to locate an item please contact us directly.

Please have the following information ready:

  1. Firearm Manufacturer
  2. Firearm Model and Serial Number
  3. Gauge or Caliber of Firearm
  4. Part Description
  5. Any other pertinent information

Then please call our Sales Department toll free at:

866-NUMRICH

(866-686-7424)

Outside U.S.A.

845-679-2417

Office Hours:

Monday through Friday
8:00 a.m. to 4:30 p.m. EST

Forums

Forums Home > Hand Guns > Hand Guns > model 213 9x19 KSI Pomona, CA firearm parts/magazine
model 213 9x19 KSI Pomona, CA firearm parts/magazine
Replies for model 213 9x19 KSI Pomona, CA firearm parts/magazine
Author Message
NWhomegrown21
Author Image
Joined: September 2010
Posts: 1
Location:
Moses Lake, WA
Posted: July 29, 2010 10:33 PM

I recently obtained a KSI firearm its distributer says pomona CA but its made in china I need to get extra magazines & some parts to ensure proper discharge, if anyone has this information some correspondence would be greatly appreciated
Alan in Nevada1
Author Image
Joined: February 2010
Posts: 385
Location:
Posted: July 30, 2010 1:42 AM

China has exported several different handguns over the years, most clones or copies of Russian autopistols, so you are going to have to come up with a model designation before you can begin the search or anybody can help you. Should be on the exterior of the pistol somewhere, probably the slide.


Alan in Nevada1
Author Image
Joined: February 2010
Posts: 385
Location:
Posted: July 30, 2010 1:45 AM
China has exported several different handguns over the years, most clones or copies of Russian autopistols, so you are going to have to come up with a model designation before you can begin the search or anybody can help you. Should be on the exterior of the pistol somewhere, probably the slide.


Joined:
Posts: 0
Location:
Posted: July 30, 2010 3:14 AM
NW: check with our hosts. if they are out, and your gun is in 9 mm parabellum, repost here. mel chung
Joined:
Posts: 0
Location:
Posted: July 30, 2010 9:42 AM
Does your model use the wide style 9mm magazine (1-7/16" wide) that has a spacer installed in the magazine? Item number 881580 TOKAREV 9MM Conversion Magazine (factory converted to 9mm by installing a spacer block, shortened follower and spring) is no longer available and we do not have a source.
We do have a new Chinese manufacture, blued-steel Magazine available for use with full-size Tokarev type pistols that have a filler strip (spacer) installed in the magazine. See item number 576400A NORINCO 213 Magazine, 9MM, 8 Round. This magazine will require the use of a spacer in the magazine well.
We do have the Magazine Well Spacer (filler strip), 9MM Conversion (pin included) available. This spacer attaches in the magazine well, allowing the use of the narrow type 9MM magazine. See the links below.

www.gunpartscorp.com/catalog/Detai...

www.gunpartscorp.com/catalog/Detai...
NWhomegrown21
Author Image
Joined: September 2010
Posts: 1
Location:
Moses Lake, WA
Posted: July 31, 2010 5:37 AM
thanx 2 all who replied your correspondence is deeply appreciated, the Norinco link seems to be a match however, I need to replace the extractor on the 213 pistol as it seems to jam randomly due to it being warped .......
Our members have made a total of 238996 posts
We have 488107 registered members
The newest member is John1003800
FORUM RULES
You are not logged in.
You cannot post replies