Due to the recent notice by the Canadian Postal Union we will not be accepting Canadian orders until the situation is resolved. This only effects Canada, we will still accept all other international orders.
Search By Item Number Or Keyword
Search Manufacturers By Letter
Still Can't Find It?
If you're unable to locate an item please contact us directly.
Please have the following information ready:
- Firearm Manufacturer
- Firearm Model and Serial Number
- Gauge or Caliber of Firearm
- Part Description
- Any other pertinent information
Then please call our Sales Department toll free at:
Monday through Friday
8:00 a.m. to 4:30 p.m. EST
H&R Model 923 part help
Replies for H&R Model 923 part help
Joined: March 2013
Posted: March 21, 2013 10:15 PM
I inherited a 923 with an R serial number. I'm now the 3rd generation in my family to own it, and it's had countless rounds fired though it since my grandfather purchased it new. Unfortunately, the firing pin is no longer striking rounds consistently. Every 1 out of 4/5 pulls results in a fire...obviously problematic. Upon inspection I noticed the firing pin seems to have either broken off at the tip or worn down from so much use over the past ~58 years. When you push/force the hammer forward (barely any play BTW) the hammer BARELY protrudes through to the cylinder. I cannot see any means of removing or replacing the firing pin itself. It appears to be part of the hammer. While the dollar value of it is low from what I have seen online, its sentimental value to me is priceless. Any help would be appreciated in finding the proper part(s).
Our members have made a total of 244467 posts
We have 676248 registered members
The newest member is Gary 1192030
You are not logged in.
You cannot post replies