Find Parts

Search By Item Number Or Keyword
Search Manufacturers By Letter

Still Can't Find It?

If you're unable to locate an item please contact us directly.

Please have the following information ready:

  1. Firearm Manufacturer
  2. Firearm Model and Serial Number
  3. Gauge or Caliber of Firearm
  4. Part Description
  5. Any other pertinent information

Then please call our Sales Department toll free at:

866-NUMRICH

(866-686-7424)

Outside U.S.A.

845-679-2417

Office Hours:

Monday through Friday
8:00 a.m. to 4:30 p.m. EST

Forums

Forums Home > Identifying or Finding F... > High Standard > I found a High Standard .22 Caliber Sentinel R-101 revolver.
I found a High Standard .22 Caliber Sentinel R-101 revolver.
Replies for I found a High Standard .22 Caliber Sentinel R-101 revolver.
Author Message
Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: June 29, 2008 3:31 PM

Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: June 30, 2008 2:25 PM
Your Sentinel was manufactured in 1958. The value for a model in very good to excellent condition would be about $100 to $150 or more.
RJ
Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: January 23, 2009 5:01 PM
The pistol is in fair condition needs blued. SN. 993328. could you please give me a value. Thank You.
Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: January 28, 2009 1:07 PM
Mike,
Your Sentinel was manufactured in 1959. The value for a model in fair condition would be about $75 to $100.
RJ
Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: November 2, 2009 8:20 AM
22 revolver sentinel R-101 848435 it a 9 shot what is the value and are they any good thank you Debbie
Numrich Archiver
Author Image
Joined: February 2010
Posts: 161648
Location:
Posted: November 4, 2009 3:04 PM
Deb,
From the Blue Book of Gun Values:
The Sentinel revolvers begin with the R-100 design series, and continue through the R-109 design series. Later steel framed Sentinels carry no design series markings. A change of design series designation indicates design changes to the guns. The R-105 has the fewest known survivors. The design series designations and the associated catalog numbers which follow are best estimates, and may require further research. Earliest Sentinels in 1955 were in a separate serial number series from 1 through approximately 45,000. Then they were included in a serial number series common to all handguns. In 1974, they were again put in a separate serial number series with a prefix - S101 through S79946. Many of the later guns had a "V" suffix which indicates it was visually impaired, but guaranteed to work properly. High Standard private labeled the aluminum framed Sentinels for both Sears and Western Auto. A few were also provided to Col. Rex Applegate for his ARMAMEX company in Mexico.
Add 20% for extra convertible cylinder (.22 LR/.22 Mag.) on those models listed that apply.
Add $30 for box and papers unless otherwise specified.

SENTINEL - .22 S, L, or LR cal., aluminum frame, nine shot, SA or DA, swing out cylinder, 2 3/8, 3, 4, 5, or 6 in. barrel, fixed sights, return spring on ejector beginning with R-102 Series, until 1960 the 2 3/8 in. barrel model had a bobbed hammer, beginning in 1961 this changed to a standard spur hammer with no change in Cat. No.
Sentinel Blue finish Grading:
100% 98% 95% 90% 80% 70% 60%
$225 $200 $140 $100 $85 $70 $55

Sentinel Nickel Finish Grading:
100% 98% 95% 90% 80% 70% 60%
$250 $225 $200 $115 $95 $85 $65

Subtract $15 for early models without spring return ejector.
Add $25 for 5 in. barrel.

R-100, R-101, R-102 Series 3 in. bbl., brown sq. butt, plastic grips, blue, #9127, mfg. 1955-1960.
R-100, R-101, R-102 Series 3 in. bbl., brown sq. butt, plastic grips, nickel #9136, mfg. 1956-1960.
R-100 Series 5 in. bbl., brown sq. butt, plastic grips, blue, #9128, mfg. 1955 only.

Sentinel R-100, R-101, R-102 Series 6 in. bbl.

Brown sq. butt, plastic grips, blue, #9128 mfg. 1956-1964.
White sq. butt, plastic grips, nickel #9137 mfg. 1956-1964.
Our members have made a total of 240038 posts
We have 519063 registered members
The newest member is Michael1034774
FORUM RULES
You are not logged in.
You cannot post replies