Find Parts

Search By Item Number Or Keyword
Search Manufacturers By Letter

Still Can't Find It?

If you're unable to locate an item please contact us directly.

Please have the following information ready:

  1. Firearm Manufacturer
  2. Firearm Model and Serial Number
  3. Gauge or Caliber of Firearm
  4. Part Description
  5. Any other pertinent information

Then please call our Sales Department toll free at:

866-NUMRICH

(866-686-7424)

Outside U.S.A.

845-679-2417

Office Hours:

Monday through Friday
8:00 a.m. to 4:30 p.m. EST

Forums

Forums Home > Shotguns > Charles Daly
Charles Daly
Replies for Charles Daly
Author Message
Joined:
Posts: 2278
Location:
Posted: August 19, 2010 5:23 PM

I need a bolt locking block for a Charles Daly, Field, 12 ga 3" magnum. The gun was made in Turkey and has KBI-HBG Pa stampings on it. Any suggestions of a possible parts source would be appreciated. df
Zeke
Author Image
Joined: August 2011
Posts: 3860
Location:
JAMESPORT, NY
Posted: August 19, 2010 6:09 PM
The word was that when KBI went out of buisness that one of its in house repair shops was going to maintain the warranty and parts for these imports. Both KBI and Charles daly use the same contact info out of Harrisburg PA...Here it is: Charles Daly PO Bx 6625 Harrisburg, PA. 17122 Ph# 866-325-9486 On-line at www.charlesdaly.com the only difference from this is the header..KBI all other data is the same.. Another avenue is to contact the BATFE and file a freedom of information act application on who KBI/Charles Daly was importing these from and do buisness in Turkey
Joined:
Posts: 0
Location:
Posted: August 20, 2010 8:38 AM
We will need more information to determine the correct model and variation. We may need samples or pictures or tracings of the parts needed to determine if we have the correct match available. See the link below and check the semi-auto model listings.

www.gunpartscorp.com/catalog/Produ...
nwducker
Author Image
Joined: November 2011
Posts: 1
Location:
BENTONVILLE, AR
Posted: August 23, 2011 5:12 PM
I bought the locking block repair service at gunbroker.com and now my CD fires and cycles great. thanks for the help.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=247011960
agwost4728
Author Image
Joined: October 2011
Posts: 2
Location:
SAINT JOSEPH, MN
Posted: September 22, 2011 9:18 PM
I may have a new supply of 12ga locking blocks. I need to know how much interest before I proceed. Al
agwost4728
Author Image
Joined: October 2011
Posts: 2
Location:
SAINT JOSEPH, MN
Posted: September 22, 2011 9:23 PM
bolt locking block for a Charles Daly, Field, 12 ga 3" magnum. I may Have a supply.Al
Our members have made a total of 238987 posts
We have 487687 registered members
The newest member is Steve1003380
FORUM RULES
You are not logged in.
You cannot post replies