Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

Forum > Gunsmithing > Gunsmithing


Topic Name Replies Views Last Reply
Have not been here for a while, do not recognize any faces.  Is this my old friend Zeke from NY with a new name?[img]/pub/Smiles/Happy.png[/img] If so, greeting and salutations.  Is anyon ...
by Curtis Childress
1 300 06/03/2017 10:26 AM
SN CBA35.... which model or part number hammer fits this gun.
by Hugh809201
1 153 05/30/2017 05:20 PM
I have a ERMA WERKE EM1 and looking for someone who knows what the Rear Sight Screw Thread Pitch is? Metric? Often lost and hard to come by screw. I have a customer looking for one.
by racerric
1 372 05/19/2017 11:23 AM
I have a Colt Woodsman and the assembly lock keeps falling out after I cycle the slide a few times.  It does its job of retaining the recoil spring assy when taking the gun apart, but it keeps fa ...
by gunner P
1 256 05/02/2017 06:04 PM
A customer brought in an older Browning BPS for bluing. It has the older style nut on the inside of the receiver to secure the safety in place. I've got it soaking in Kroil right now because the nut s ...
by Michael723549
2 285 04/23/2017 11:30 AM
 I have a couple of the Remington Elliot Derringer O/U Derringers in .41 RF. I shoot these guns and I am looking for a gunsmith who works on these. Any ideas?
by Erik1089498
2 289 04/20/2017 11:48 AM
I am replacing the firing pin and the firing pin retainer screw in my J Stevens 94b-K single shot 12 ga. Do I need to do anything special to keep the screw from backing out? Loctite or something of ...
by Tim1246399
2 317 04/19/2017 03:43 PM
Good Morning All, This is a first for me. I've been presented a disassembled H&A hammerless side-by-side shogun. I am attempting to reassemble it. I am in search of mauals, schematics, and even ...
by james1243361
1 436 03/28/2017 03:24 PM
Hello all, I'm trying to replace a missing ejector on a Western Field M147. I believe the Western Field M147 is also the Mossberg 195 sold by Montgomery Ward's back in the day. The base of the ejec ...
by S.O.
1 458 03/15/2017 09:37 AM
If a new ejector has to be installed are they "drop in" or do they need to be timed or something else?
by Patriot476
2 305 03/14/2017 05:19 PM