Notifications

Close

CZ70

Author Message
David906807
Joined: July 2013
Posts: 1
Posted: October 9, 2022 10:20 AM

Ordered and extra slide for my CZ70 just to have. The inside of the Slide was not machined out for the EJECTOR to pass by. The Slide would not fully close on the frame. Are there two different slide types for the CZ-70?

 

Delos579621
Joined: September 2011
Posts: 235
Posted: October 18, 2022 02:16 PM (This post was last edited October 18, 2022 03:25 PM)

Apparently there are two different style slides,The ejector/hold open part needs to be modified to use on the other slide unless you have the original  variation ejector/hold open device from the other slide.Get a new ejector/hold open from Apex and fit it to the spare slide.Apex has new parts while GPC parts are used.