Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

Forum > Gunsmithing > Gunsmithing > Rossi single rifle

Rossi single rifle

Author Message
Desert Rat
Joined: January 1900
Posts: 7
Posted: February 6, 2013 06:15 PM
I have a rossi single shot rifle that i can`t open to load. It seems that when i push down on the opening lever the locking plate does not move far enough for it to open. Has anyone had this problem, or have any ideas what could be wrong. THANKS
Ezequiel
Joined: August 2011
Posts: 5695
Posted: February 7, 2013 09:57 AM

It is a fairly common problem..not only with this brand,but with the design in general..You might try to open it by doing a partial disassembly..like removing the forend and pulling the barrel a bit forward as you try to break the action(I assume we are discussing an unloaded firearm here!)  If this simple act doesn't do it..then it should be returned to the manufacturer. Rossi warraties their product line for its lifetime. You can contact Rossi via www.rosiusa.com for instructions Their physical address is: Rossi   16175 NW  49th Ave.     Miami,FL  33014 Ph#(305)474-0401  if there is a local warranty center....you can find that info on their website

Desert Rat
Joined: January 1900
Posts: 7
Posted: February 7, 2013 10:24 AM

Thanks for the reply Zeke!!  That would probably be the smart thing to do.