Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

Forum > Gunsmithing > Gunsmithing > Stevens bolt action model 59a 410 guage shot gun

Stevens bolt action model 59a 410 guage shot gun

Author Message
Roy Mcleod
Joined: June 2010
Posts: 53
Posted: August 2, 2010 05:09 PM
LOOKING, for the following, parts, for the above 410 shot gun. ea (1) Complete bolt assy. ea (1) Complete outside magazine tube assy c/w front yoke bar and front tube collar. ea (1) Complete inside magazine tube assy c/w rear follower plug, spring and front plug. ea (1) Front barrel to magazine filler block bar. ea (1) Stock rear butt plate. Need help Thanks Roy
Ezequiel
Joined: August 2011
Posts: 5695
Posted: August 2, 2010 05:43 PM

Roy, I know this isn't going to make you happy...but I have been looking for a complete bolt assy for about 10-15 years and to no avail.. If you find a source of parts for this one your help would be...well a big help!!!!!!!! Zeke

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: August 3, 2010 07:26 PM

Zeke:

Many thanks. Our host, has a lot of parts, for the 59a, but NO bolt or No magazine inside tube!!!

From, what you , have explaned, I, WILL not make a move or do anything untill i locate a bolt FIRST!!!

I, will keep you posted.

thanks again

Roy

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: August 4, 2010 05:40 PM

The bolt assembly is no longer available and we do not anticipate having them in stock anytime soon. We do have item number 126690A STEVENS 39A, 59A, 59B, 59C Magazine Tube Assembly, Inner available.

RJ:

Thanks, I, will hold on magazine parts, untill I, locate a bolt.

Roy

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: August 29, 2010 06:51 PM

Roy, I know this isn't going to make you happy...but I have been looking for a complete bolt assy for about 10-15 years and to no avail.. If you find a source of parts for this one your help would be...well a big help!!!!!!!! Zeke

Zeke:

plz: note PM sent Aug 27 th friday--Info on Model 59a Shotgun!!

Roy

Joe B.
Joined: January 1900
Posts: 19
Posted: September 5, 2010 11:42 AM

This info may not help much but FYI the Model 39A is the same gun with a different trigger guard. I have one of each & treasure them both. Just info in case you find parts for the 39A they will interchange.

Joe B.
Joined: January 1900
Posts: 19
Posted: September 5, 2010 12:07 PM

Roy & Zeke--in addition to my previous post about the 59A & 39A bolts being interchangeable, I was just looking at parts on this site (http://www.gun-parts.com/savageshotgun/) and there are parts for the 39 bolt--(head--complete bolt body--firing pin--etc.) To find this scroll all the way down to the bottom of the page and look for Stevens 39 bolt action shotgun. LOL.

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: September 5, 2010 07:07 PM

Joe B.

I, am still looking for the following parts, for my Stevens 59a. Outer magazine tube. Outer magazine tube front collar.

are you SURE, parts for the stevens 39 will fit?

thanks

Roy

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: September 6, 2010 06:25 PM

Joe B.

Thanks for your intrest, in my 59a shotgun parts problem. I, checked under gun parts corp.com (Numrich) and could not find a 39 0r a 39a listed!!

I, got to thinking,perhaps, your shotguns, are single shot bolt actions and that the bolts are interchangeable. Other parts, like tube magazine parts

are not on the 39 or the 39a. I, got all my parts, at a gun co that savage web site recommended. the co is Out Back Gun Parts, Inc. Address is

2110 Mclean ave. New Albany, IN 47150 Phone 812-945-0480( they will have MOST anything you may need in SAVAGE/ STEVENS current or obsololete

parts) When I, asked about bolts for the 59a, they had three bolts. i, got the one I, needed, for the 59a, that had TWO extractors, at bolt head.

Any info, you, may have, on magazine parts plz:let me know!!

Thanks again

Roy

Roy Mcleod
Joined: June 2010
Posts: 53
Posted: September 14, 2010 06:42 PM

Joe B.

Thanks for your intrest, in my 59a shotgun parts problem. I, checked under gun parts corp.com (Numrich) and could not find a 39 0r a 39a listed!!

I, got to thinking,perhaps, your shotguns, are single shot bolt actions and that the bolts are interchangeable. Other parts, like tube magazine parts

are not on the 39 or the 39a. I, got all my parts, at a gun co that savage web site recommended. the co is Out Back Gun Parts, Inc. Address is

2110 Mclean ave. New Albany, IN 47150 Phone 812-945-0480( they will have MOST anything you may need in SAVAGE/ STEVENS current or obsololete

parts) When I, asked about bolts for the 59a, they had three bolts. i, got the one I, needed, for the 59a, that had TWO extractors, at bolt head.

Any info, you, may have, on magazine parts plz:let me know!!

Thanks again

Roy

joe B:

I, have to add--I, have a question, In the shotgun -39a, what do the letters-FYI Mean??