Notifications

Close
Forum > Hand Guns > Hand Guns > Rossi M711 .357 mag.

Rossi M711 .357 mag.

Author Message
Towering Arms
Joined: March 2018
Posts: 10
Posted: February 28, 2013 10:22 PM
Does the hammer nose cup on the Rossi M711 screw in or is it pressed in?? I have one that backs out just enough to lock the action after fired a few times. It is easy to tap it back into place but it come right back out. I tried to tap it out from the hammer side but it will not go any farther. I did not want to use too much force for fear that it might be threaded. None of the parts schematics I have looke at show a detailed enough veiw to tell.
Ezequiel
Joined: August 2011
Posts: 7475
Posted: March 1, 2013 09:39 AM

Secure it with a drop of Loctitie BLUE..BTW  the M711 is an INTERARMS firearm and BrazTech/Rossi will have nothing to do with them(or any of the Interarms imported guns)

Tim1148312
Joined: February 2016
Posts: 1
Posted: April 8, 2022 03:44 PM

was kind of curious on this topic, my dad bought a rossi interarms m711 in 357 mag, it has a missing firing pin i was wondering if anyone would know where a guy would be able to find one or even a firing pin from another manufacture that would fit with little to no modification? thanks