Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

H&R 922 Cylinder

Author Message
John841482
Joined: December 2012
Posts: 0
Posted: December 31, 2012 06:30 PM
I have a H&R 922 revolver (.22lr) serial number F3285 that is missing the cylinder.  Can you tell me if you carry this cylinder and the part number or info to order?   Thanks!
Ron
Joined: January 1900
Posts: 69
Posted: January 1, 2013 04:12 PM

John841482,

    Your H&R 922 revolver is classified as a double-action, first model, large solid-frame, fifth variation.  It was manufactured in 1946. These cylinders are pretty hard to find. If our host can't help you, please contact me at mailto:ronmar68@comcast.net. I might have one for you.

    Happy New Year!

    Ron

gunpartscorp
Joined: August 2017
Posts: 1452
Posted: January 2, 2013 10:24 AM

Currently we are out of stock on the cylinder for this. 

www.gunpartscorp.com/Products/1378...

please check back in the future to see if we get any in

 

FURTHERING THE LEGACY, ONE PART AT A TIME

 

 

docsyvertson
Joined: January 2013
Posts: 1
Posted: January 4, 2013 10:15 PM

I am also looking for a replacement cylinder for my H&R Model 922 that belonged to my Grandfather.  I am trying to repair so I can give this to my son when he geta older.  Serial # M38012 

Any assistance with this would be greatly appreciated!

Ron
Joined: January 1900
Posts: 69
Posted: January 7, 2013 10:39 AM

docsyvertson ,

  Email sent.

  Ron

Len927986
Joined: October 2013
Posts: 6
Posted: October 12, 2013 02:37 PM

Hello I'm helping my father in law to locate a cylinder for his model 922. This gun has no serial number and he had purchased it when he got out of the service in 1951. Locating a cylinder has been difficult at best. Any assistance would be greatly appreciated. Thank you very much, Len 

Len927986
Joined: October 2013
Posts: 6
Posted: October 13, 2013 06:33 PM

Serial number correction, it is E6561. My searching showes manufactured in 1944. Now, how do I know if this is an early model for the sake of locating a new cylinder?

Len927986
Joined: October 2013
Posts: 6
Posted: October 13, 2013 07:56 PM

Aslo, I might add, his original cylinder was a smooth OD with no cylinder notches, would this make it an early model?

Len927986
Joined: October 2013
Posts: 6
Posted: October 14, 2013 06:44 PM

Hi Ray

My father in law just brought his 922 over so I can have a look. the cylinder does in fact have notches and the Mainspring is flat. Hope this helps. Thanks again

Len

Ron
Joined: January 1900
Posts: 69
Posted: October 15, 2013 11:24 AM

Len,

  The serial # is located under the grips on the left side of the grip frame. The H&R 922 revolvers all had serial numbers assigned. If he bought it new in 1951, then it would probably be a 7th variation, and the serial # should have a letter prefix of  "J" thru "M". I have cylinders for the 922 revolvers. If interested, plese email me at ronmar68@comcast.net.

 Thank you!

  Ron