Notifications

Close

ID Part on 336A Receiver

Author Message
Joel918029
Joined: September 2013
Posts: 0
Posted: August 15, 2022 09:56 AM

I'm trying to identify the part # on the bottom left side of the receiver of my 336A  above the lever.  The schematic only shows the right side of the receiver.  Part 61 is a peep site dummy screw and shows two are required but there is only one hole in the receiver. Also, there are no threads in the hole. 

hunt40
Joined: March 2010
Posts: 212
Posted: August 16, 2022 09:23 AM

 

  The screw needed for the Marlin 336A is the trigger plate support screw. We are currently out of stock on this screw, but reproductions are on order.  See link below.

https://www.gunpartscorp.com/products/2038700G