Topic Name Replies Views Last Reply
I have a Mauser model: "Mn 410 B" Calibre .22 Age: "80-86" years old 1934-1940 Manufacture location: "Germany" at the Mauser factory. The British proofs were added when it was imported to England. Can ...
by mmhaggie
1 201 11/19/2020 06:10 PM
Will the detachable 3 round mags #808870 and 808880 work on a Mauser 98 with top loading magazine by removing the floorplate, spring and follower? Or is it only for models with a different floorplate? ...
by rwmanty
1 25 09/26/2022 07:32 AM
I ordered a mause cocking piece (order # 6672972.1) for a model 98 Mauser. I am a school trained gunsmith (Piedmont Technical Institute) and a machinist (do you will know I"m not a AR goober ). Anyway ...
by del
4 42 09/22/2022 09:20 AM
Hello Numrich support team,  I purchased a detachable rear swivel (part# 1038900) for my Brazilian Mod 1908/34 .30 Mauser however the sling I purchased from your sight was too wide for the swive ...
by ryhassick
2 89 08/08/2022 08:20 AM
Can a  96 Swedish Mauser Extractor Collar (#3690) be substituted for a 93 Spanish Mauser  Extractor Collar (#5090) Can a 96 Swedish Mauser Handguard Ring (# 14430 be substituted for a 93 Sp ...
by Frank517555
1 53 07/15/2022 09:06 AM
Looking for a Rear Toggle/Axle Pin for a BYF (Mauser) 1942 model, serial number “38”. Please let me know if Numrich may have one in stock.
by Fishermankw
1 26 07/15/2022 08:51 AM
This is in reference to Product #: 1369340 which is on sale or $150.   On the left side of the stock is pictured.  Is the right side dished out for the bolt handle? Will this rec ...
by Frank517555
1 32 07/15/2022 08:49 AM
I received a complete replacement bolt for a Czech CZ24 (Part#1032530) . The fit of the threads between the bolt body and the bolt sleeve is so tight that it impossible to rotate the bolt to the locke ...
by Charles1091262
1 58 07/06/2022 02:02 PM
The only bolt sleeve that you have pictured for the 1891 Argentine Mauser is the early 'no wings' version.  Do you all have any of the later, 'winged' versions?  I'm looking for the version ...
by CoRifleman
1 38 07/06/2022 01:56 PM
I am looking for a rear sight assembly with waffenamp # 135 stamp. Would you be able to supply me with that article?
by landkdybas
1 41 07/06/2022 01:11 PM