Notifications

Close

Help with LC Smith parts

Author Message
mvpd138
Joined: April 2022
Posts: 3
Posted: April 5, 2022 12:46 PM

I was tasked to fix an old LC Smith hammerless sise by side .12 gauge. The forearm will not snap into place. I took the forearm iron out and found a really small bar spring that is broken. I can’t find this spring on any of the schematics and can’t find a replacement part. Any help in finding this part would be GREATLY appreciated!!

GunPartsCorp
Joined: August 2017
Posts: 7109
Posted: April 6, 2022 11:10 AM

 

  The L.C. Smith spring pictured is the forend iron lock spring. Too order, email your order information to orderinfo@gunpartscorp.com using #999999 for $7.25. Ask the rep to put the order on hold and to Attn: #32. Thank you.

mvpd138
Joined: April 2022
Posts: 3
Posted: April 28, 2022 05:38 PM

Ok, I’m an idiot and did not take a pic of what I was taking apart. Can someone ID this block that is on top of the forearm  Lock spring and do I have it in correctly? Also I need to order a screw for the front end of the forearm and I can seem to find the correct screw. ANY help would be appreciated!!

I’m 

mvpd138
Joined: April 2022
Posts: 3
Posted: April 28, 2022 05:43 PM

This is the screw I need. Couldn’t get it to load in the other reply . 

hunt40
Joined: March 2010
Posts: 230
Posted: April 29, 2022 10:19 AM (This post was last edited April 29, 2022 10:20 AM)

 

  I have not seen any examples of L.C. Smith forend irons with the block you have pictured. They all have had the screw going through the lock spring without the block.

  To order a used forend iron screw, email orderinfo@gunpartscorp.com and use #999999 for $3.00. Ask the rep to put the order on hold and to Attn: #32.

mvpd138
Joined: April 2022
Posts: 3
Posted: April 30, 2022 12:44 AM

It was in there when I took it apart, I’ve seen them somewhere before but I can’t remember how it was installed, with the bevel forward or backward. Thanks for info on the screw