Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

Forum > Identifying or Finding Firearms or Part > Other Manufacturers > JC Higgins Model 20 series 583.200

JC Higgins Model 20 series 583.200

Author Message
siumillers
Joined: October 2011
Posts: 1
Posted: October 4, 2011 11:50 AM
I am looking for an ejector and a left hand extractor and extractor spring....for a JC Higgins Model 20 series 583.200 sear roebuck. The Jc Higgins model 20 schematic for these parts on your website does not look the same as the parts I am needing. The schematic for a High Standard Flight King K100 is a better schematic for this gun model. Your website does not have a schematic for the High Standard k100. Here is a schematic from the owners manual with part numbers. http://www.histandard.info/manuals/hpashotguns/1109D150R.pdf The parts I need are on this schematic. However the picture of the ejector is blurred so I cannot tell if it is the same. My ejector has a half moon shape hump in it. I have attached a picture of it. The ejector reference number on the image is 21. The part number is 115-B. The extractor I need is the left hand one as you look down the barrel On the schematic I linked you to...the extractor reference number in the image is 24...it is part number118-B and the corresponding spring image reference number 26...its part number would be 167-B. I have attached a photo of the extractor also. This gun has a poly-choke system. Barrel is fixed cannot remove. It is a 12 gauge 2-3/4 chambered.. If you need additional photos or info please let me know. Thanks, Rick Miller [IMG]http://i121.photobucket.com/albums/o229/siumillers/jchigginsparts.jpg[/IMG]
siumillers
Joined: October 2011
Posts: 1
Posted: October 5, 2011 02:02 PM

RJ were you able to physically verify the parts with the picture I attached. I am concerned because the parts on the schematic for your JC Higgins model 20 do not look the same as the ones in the picture attached.

Thanks Rick