Notifications

Close

Remington Model 10

Author Message
r2cents
Joined: January 2021
Posts: 3
Posted: April 11, 2022 09:59 AM

Ok, there are 2 part numbers that should work together. They are listed 477010 and 477020. The yoke and the stop screw. The picture of the yoke does not show the back on the website. I had ordered a barrel with yoke and upon arrival the yoke that is on the barrel is not the yoke I need. Just got the barrel yesterday. So what I need to know is will part 477020 screw into part 477010 ?

GunPartsCorp
Joined: August 2017
Posts: 7109
Posted: April 11, 2022 03:14 PM

 

  The barrel yoke stop screw(#477020) does not screw into the barrel yoke(#477010). It screws into a hole in the frame and acts as a stop.

r2cents
Joined: January 2021
Posts: 3
Posted: April 11, 2022 04:28 PM

When you say frame do you mean receiver?  If so then whomever had this one must have broken it off and I need to drill and extract that because they drilled and tapped the yoke on the barrel and put a screw there.

GunPartsCorp
Joined: August 2017
Posts: 7109
Posted: April 12, 2022 07:21 AM

 

  That screw head is not the barrel yoke screw and is a variation found on some of the barrel yokes. We are not sure the purpose of it. You might want to try a post on our public shotgun forum as somebody out there may have more information.

r2cents
Joined: January 2021
Posts: 3
Posted: April 14, 2022 09:14 AM (This post was last edited April 14, 2022 10:05 AM)

Can you check your part number 477010 and post pictures of both sides ? If you have a yoke that is like the one in my picture I would like to get it.

GunPartsCorp
Joined: August 2017
Posts: 7109
Posted: April 14, 2022 10:52 AM

 

  There is one yoke that matches yours with the screw. Too order, email orderinfo@gunpartscorp.com and use #999999 for $28.89. Ask the rep to put the order on hold and to Attn: #32 so we can make sure you get the right one. Thank you.

r2cents
Joined: January 2021
Posts: 3
Posted: April 14, 2022 11:02 AM (This post was last edited April 14, 2022 11:10 AM)

Thank you. For checking. The ones with the screw in the yoke appear to be for early model 10’s. I have emailed according to your instructions.

GunPartsCorp
Joined: August 2017
Posts: 7109
Posted: April 14, 2022 12:10 PM

 

  Just got the order number. It will be shipped today.