Savage 110L Stock Blind Magwell vs Flat Floorplate
Savage 110L Stock Blind Magwell vs Flat Floorplate
Author
Message
Joseph
Joined: September 2024
Posted: December 2, 2024 05:40 PM
Savage 110L Left hand .308. Looking at 265280A for "flat floorplate" (which I think will be the correct one) and 265260A for "blind magwell". This has the 4.522" action screw spacing, uses a non-hinged floorplate and has a cutout for magwell about 3.42" long w/ 1" width at the rear of opening tapering to .950" to the front, barrel also has the bump for rear sight. Would the "blind magwell" be totally enclosed on the bottom of the stock or is it still open for a non-hinged floorplate to cover it? Could either one potentially work? Thanks.
If a Savage 110 stock is described as a blind mag well it is totally enclosed. It looks like you do need the flat floorplate type, but neither #265280 or #265260 has a 4.522" screw hole spacing.
Numrich Archiver
Joined: February 2010
Posted: December 11, 2024 06:19 PM
If a Savage 110 stock is described as a blind mag well it is totally enclosed. It looks like you do need the flat floorplate type, but neither #265280 or #265260 has a 4.522" screw hole spacing.
