Winchester Model 77, .22lr, ser# 16054. Part 21 Operating Slide Assembly
Winchester Model 77, .22lr, ser# 16054. Part 21 Operating Slide Assembly
Author
Message
Mike
Joined: August 2024
Posted: August 12, 2024 05:50 PM
Your schematic shows two types for this part. One is for a tube fed, the other for clip fed. My gun is a clip fed. The part pictured for the clip fed is different than mine. My part for the clip fed looks like the picture shown for the tube fed. My gun is original. Are the pictures for this part reversed on the site. Hope you can help. I want to make sure I get the correct part. Thanks.
There are four or five variations of these Winchester 77 operating slides. The serial number indicates you probably need the slide without the hold open notch. We have a used one available. Email your order information to orderinfo@gunpartscorp.com and order using unlisted item #999999 for $36.03. Ask the rep to put the order on hold and to attention #32. Thank you.
Numrich Archiver
Joined: February 2010
Posted: August 14, 2024 01:27 PM
There are four or five variations of these Winchester 77 operating slides. The serial number indicates you probably need the slide without the hold open notch. We have a used one available. Email your order information to orderinfo@gunpartscorp.com and order using unlisted item #999999 for $36.03. Ask the rep to put the order on hold and to attention #32. Thank you.
