Notifications

Close
Forum > Shotguns > Shotguns > Rem model 1900

Rem model 1900

Author Message
Randy601904
Joined: October 2010
Posts: 0
Posted: November 4, 2022 11:16 AM

I have a model 1900 in the shop for restoration. I have the receiver fully stripped except for the firing pin cups. They will not come out. I am looking for any reasonable suggestion for the removal of these cups. HELP!!!

Delos579621
Joined: September 2011
Posts: 242
Posted: November 4, 2022 11:54 AM (This post was last edited November 4, 2022 11:56 AM)

There are threaded plugs with screw driver slots.You need a slotted screwdriver bit exactly the size of the slot and some penetrating spray and a 1/4" ratchet but you may need a 3/8 ratchet with 1/4" adapter for more leverage Many times these are hard to get out but if you keep with the penetrating spray and the ratchet they will eventually come out.