Furthering the Legacyone part at a time

Have questions? Call: 866-686-7424

Forum > Shot Guns > Shotguns > Stevens Model 58 410 Shotgun

Stevens Model 58 410 Shotgun

Author Message
twagoner
Joined: September 2012
Posts: 0
Posted: September 2, 2012 03:06 PM
Am looking for a complete bolt assembly for a Stevens Model 58 410 Shotgun
Ezequiel
Joined: August 2011
Posts: 5695
Posted: September 2, 2012 03:27 PM

I've been looking for one for about ten years, lost a couple on auction sites,but haven't found any dealers with one. If you find someone who has "Some" e-mail off this sie..I'll do the same...meanwhile, I hope your aware that a bolt ..assy or parts are not drop-in interchangable. There are critical areas that must be dealt with. The major is headspace...this is a bit more critical on a bolt that locks up on the handle root...the tiniest bit of play can lead to catastrophic failure...driving the bolt rearward with the same force as what leaves the muzzle(shot charge). Sear and trigger engagement is also critical and with any change to the original fit..the safety becomes an issue.(safety on this model blocks trigger movement) and making an adjustmenty(mechanical cut or peen) changes the trigger rotation and with that..the safety fit and function...

Pul7gs
Joined: January 1900
Posts: 345
Posted: September 2, 2012 03:43 PM

There is one listed on Abay right now. http://www.ebay.com/itm/221118595855?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_22wt_1400