Bushnell magnum phantom mount for new model blackhawk


Author	Message
Bill Joined: April 2025	Posted: April 18, 2025 06:30 PM I have a 1970's ruger new model blackhawk with bushnell magnum phantom scope. One of the screws that screws into the top of the gun is a little stripped. Bushnell did not have the screw. It not just a screw. While it threads into top strap, the top portion is tapered so that when the screws on side of mount are tightened, the mount is forced down tight against gun. See pics. The threads are 6-48 and the overall length is just over 13mm. I see there is mount for colt on website. While the mount is not exactly the same, I was wondering if the screws are? Is there a way to check thread size and overall size and compare to my pictures? It is the screw in the front of mount that fits into top strap.

Bill hammerash@hotmail.com https://www.gunpartscorp.com/brblog/post/report/ https://www.gunpartscorp.com/brblog/post/message/ Sorry, the mount on website is 1172290 for Colt. Here is picture of my mount. Bill Joined: April 2025	Posted: April 18, 2025 06:32 PM Sorry, the mount on website is 1172290 for Colt. Here is picture of my mount.
Numrich Archiver info@gunpartscorp.com https://www.gunpartscorp.com/brblog/post/report/ https://www.gunpartscorp.com/brblog/post/message/ A screw to match the Bushnell screw in the photo is not available. The tapered area is much longer on the screws used for the Colt mount. Numrich Archiver Joined: February 2010	Posted: April 21, 2025 03:02 PM A screw to match the Bushnell screw in the photo is not available. The tapered area is much longer on the screws used for the Colt mount.