NEED TO FIND MODEL TYPE FOR THIS GUN H & R 410 shot gun serial # F18967. THE MODEL IS FOLDING . NEED CORRECT FIREING PIN PART NUMBER, AND YEAR OF MFG..
The serial number prefix "F" indicates the shotgun was made in 1945. Please specify any markings on the shotgun. Thanks.
Numrich Archiver
Joined: February 2010
Posted: June 21, 2024 12:00 PM
The serial number prefix "F" indicates the shotgun was made in 1945. Please specify any markings on the shotgun. Thanks.
Dennis Catlinpepsibound@att.nethttps://www.gunpartscorp.com/brblog/post/report/https://www.gunpartscorp.com/brblog/post/message/
The serial number prefix "F" indicates the shotgun was made in 1945. Please specify any markings on the shotgun. Thanks.
Dennis Catlin
Joined: January 1970
Posted: June 22, 2024 06:31 PM
The serial number prefix "F" indicates the shotgun was made in 1945. Please specify any markings on the shotgun. Thanks.
Dennis Catlinpepsibound@att.nethttps://www.gunpartscorp.com/brblog/post/report/https://www.gunpartscorp.com/brblog/post/message/
The H & R 410 serial is 18967 there are large fetters on the left side if receiver stamped FOLDING. All parts match in numbers. the firming pin apx. .096 dia. at the end that hits primer, the body is 0.217 dia. round with a notch [ for lock screw ]. over all length is 0.652 long the numbers in parts catalog that looked like mine are, 1161540 A, , 1161540 B, 1163870, these have a diameter of .075 and 1161550, THIS ONE SHOWS A DIA. OF 0.96 I am not sure if any of these would be correct if any one . This is called a folding stock because the barrel folds all the way back to the butt stock . note: it is nick named a poacher gun due to short length when stored. hope this helps.
Dennis Catlin
Joined: January 1970
Posted: June 22, 2024 06:56 PM
The H & R 410 serial is 18967 there are large fetters on the left side if receiver stamped FOLDING. All parts match in numbers. the firming pin apx. .096 dia. at the end that hits primer, the body is 0.217 dia. round with a notch [ for lock screw ]. over all length is 0.652 long the numbers in parts catalog that looked like mine are, 1161540 A, , 1161540 B, 1163870, these have a diameter of .075 and 1161550, THIS ONE SHOWS A DIA. OF 0.96 I am not sure if any of these would be correct if any one . This is called a folding stock because the barrel folds all the way back to the butt stock . note: it is nick named a poacher gun due to short length when stored. hope this helps.
Dennis Catlinpepsibound@att.nethttps://www.gunpartscorp.com/brblog/post/report/https://www.gunpartscorp.com/brblog/post/message/
The H & R 410 serial is 18967 there are large fetters on the left side if receiver stamped FOLDING. All parts match in numbers. the firming pin apx. .096 dia. at the end that hits primer, the body is 0.217 dia. round with a notch [ for lock screw ]. over all length is 0.652 long the numbers in parts catalog that looked like mine are, 1161540 A, , 1161540 B, 1163870, these have a diameter of .075 and 1161550, THIS ONE SHOWS A DIA. OF 0.96 I am not sure if any of these would be correct if any one . This is called a folding stock because the barrel folds all the way back to the butt stock . note: it is nick named a poacher gun due to short length when stored. hope this helps.
Dennis Catlin
Joined: January 1970
Posted: June 28, 2024 01:55 PM
The H & R 410 serial is 18967 there are large fetters on the left side if receiver stamped FOLDING. All parts match in numbers. the firming pin apx. .096 dia. at the end that hits primer, the body is 0.217 dia. round with a notch [ for lock screw ]. over all length is 0.652 long the numbers in parts catalog that looked like mine are, 1161540 A, , 1161540 B, 1163870, these have a diameter of .075 and 1161550, THIS ONE SHOWS A DIA. OF 0.96 I am not sure if any of these would be correct if any one . This is called a folding stock because the barrel folds all the way back to the butt stock . note: it is nick named a poacher gun due to short length when stored. hope this helps.