H&R Topper 158 ID question


Author	Message
Gerald Joined: May 2024	Posted: May 22, 2024 05:20 PM I need a firing pin and related spring for my H&R Topper 158 12 gauge shotgun. There are three options based on serial numbers, but mine only shows a Patent number - AC 2876576. Which parts are the correct ones?

Numrich Archiver info@gunpartscorp.com https://www.gunpartscorp.com/brblog/post/report/ https://www.gunpartscorp.com/brblog/post/message/ The appropriate firing pin and spring for the H&R 158 should be #1161550 and #279250. Numrich Archiver Joined: February 2010	Posted: May 23, 2024 12:13 PM The appropriate firing pin and spring for the H&R 158 should be #1161550 and #279250.
Gerald jerry.enderle@icloud.com https://www.gunpartscorp.com/brblog/post/report/ https://www.gunpartscorp.com/brblog/post/message/ Thank you very much for your help. Gerald Joined: May 2024	Posted: May 23, 2024 01:28 PM Thank you very much for your help.
Gerald jerry.enderle@icloud.com https://www.gunpartscorp.com/brblog/post/report/ https://www.gunpartscorp.com/brblog/post/message/ I don't see my last comment here, so I am retyping it. The spring suggested above was correct, but the firing pin's pin diameter is too large. Is there a smaller diameter pin? Gerald Joined: May 2024	Posted: May 29, 2024 10:09 PM I don't see my last comment here, so I am retyping it. The spring suggested above was correct, but the firing pin's pin diameter is too large. Is there a smaller diameter pin?